Millipore Milli-Q® Integral 5 Water Purification System
Water Specifications
Milli-Q® Integral ultrapure water (Type 1)
Resistivity at 25 °C* |
18.2 MΩ•cm |
TOC** |
≤ 5 ppb |
Particulates (size > 0.22 μm)*** |
< 1 particulate/mL |
Bacteria |
< 10 CFU/100mL |
Pyrogens (endotoxins)**** |
< 0.001 EU/mL |
RNases**** |
< 1 pg/mL |
DNases**** |
< 5 pg/mL |
Flow Rate |
Up to 2 L/min |
* Resistivity can also be displayed non-temperature-compensated as required by USP
** In the appropriate test conditions
*** With Millipak® or Biopak® final filters
****With Biopak® Polisher
These values are typical and may vary depending on the nature and concentration of contaminants in the feed water. |
Milli-Q® Integral pure water (Type 2)
Resistivity at 25 °C* |
Typically 10-15 MΩ•cm |
TOC |
< 30 ppb |
Production flow Rate |
3 L/h (Milli-Q® Integral 3)
5 L/h (Milli-Q® Integral 5)
10 L/h (Milli-Q® Integral 10)
15 L/h (Milli-Q® Integral 15) |
From an E-POD® dispenser with final filter, the following water quality specifications are achieved: |
Particulates (size > 0.22 µm)** |
< 1 particulate/mL |
Bacteria** |
< 10 CFU/100mL |
Pyrogens (endotoxins)*** |
< 0.001 EU/mL |
RNases*** |
< 1 pg/mL |
DNases*** |
< 5 pg/mL |
Flow Rate |
Up to 2 L/min |
Feed water
Feed water quality |
Potable tap water as described in US-EPA, EP and WHO norms |
Feed water connection |
½” Gaz M |
Feed water pressure* |
1 - 6 bar |
Feed water temperature |
5 - 35 °C |
System Specifications
Production unit
Dimensions (H x W x D) |
500 x 332 x 484 mm (19.7 x 13.0 x 19.0 in) |
Operating weight |
24 - 28 kg (52.9 - 61.7 lb) |
Electric power supply voltage |
100 - 230 V +/- 10% |
Electric power supply frequency |
50 - 60 Hz +/- 10% |
Milli-Q® Integral main unit data connection |
Ethernet (RJ45) |
Q-POD® & E-POD® dispensers
Dimensions (H x D) |
579 x 230 mm (22.8 x 9.0 in) |
Operating weight |
4.7 kg (12.1 lb) |
Dispenser tubing length |
0.8 m (31.5 in) |
Distance from production unit to Q-POD® |
2.9 m (9.5 ft) |
Electric power cable length |
2.9 m (9.5 ft) |
Q-POD® data connection |
Parallel port (25-pin D-Sub) |