The VACUU PURE® 10C dry screw pump consistently transfers the advantages of our oil-free and chemical-resistant vacuum technology to the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemical-resistant, and no wearing parts. The VACUU PURE 10C is ideal for clean processes and the extraction of pure products. The screw pump is specially developed for processes in the vacuum range up to 10-3 mbar, but can also be used without problems at working pressures above 1 mbar. At the same time, its high chemical resistance allows for the safe pumping of aggressive gases and vapors. The use of a cold trap is no longer necessary in the vast majority of applications. Due to the high condensate tolerance inherent in its design, no gas ballast is required, even with high vapor generation. The integrated regeneration mode allows the pump to dry quickly after the end of the process, significantly increasing sample throughput compared to other pump technologies. Technical specifications:
Max. pumping speed 50 Hz: 9 m3/h
Ultimate vacuum: 5 x 10-3 mbar / 3.8 x 10-3 torr (at 1013 mbar ambient pressure)
Vacuum indicator/controller type: Without controller
Ambient temperature, lower limit, operating, in °C: 10 °C
Ambient temperature, upper limit, operating, in °C: 40 °C
Ambient temperature, lower limit, storage, in °C: -10 °C
Ambient temperature, upper limit, storage, in °C: 60 °C
Max. outlet pressure (absolute) in bar: 15 mbar above atmospheric pressure
Suction-side connection: Small flange KF DN 25
Discharge-side connection: Small flange KF DN 25
Rated power in kW: 0.7 kW
IP protection class according to IEC 60529: IP 20
Dimension L in mm: 507 mm
Dimension B in mm: 269 mm
Dimension H in mm: 413 mm
Weight in kg: 21.5 kg
Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU PURE®): 52 dBA
NRTL Certification: Yes
Scope of delivery: Pump fully assembled, ready for connection with a small flange KF DN 25 (2x centering and clamping rings included), with instructions. Suitable adapters from small flange KF DN 25 to hose nozzle are available for connection via a hose nozzle.
Nominal voltage range 1 (in V) 100-230 V
Line frequency voltage range 1 (in Hz / DC) 50-60 Hz
VACUU·BUS interface: Modbus RTU
Including VACUU·PURE shuttle mobile base
Measured vacuum: 4.6x10-3 mbar
Condition: Demonstration model
