WTW inoLab Cond Level 2 P
with WTW TetraCon325 Conductivity cell
The compact inoLab Cond Level 2 precision conductivity meter lets you perform conductivity measurements rapidly and reliably.
The inoLab Cond Level 2 provides the highest degree of operating comfort, reliability and measuring safety for all applications. The proven procedures to determine or set up the cell constant support your work with the conductivity meter.
Technical data:
Ambient temperature:
Storage - 25 ° C ... + 65 ° C
Operating 0 ° C ... + 55 ° C
Permissible relative
Humidity
Year: <75%
30 days / year: 95%
Other days: 85%
Ranges and
Resolutions:
[US / cm]
[MS / cm]
0.000 ... 1,999
(Only for cell. = 0.01 cm-1)
0.00 ... 19,99
(Only for cell. = 0.01 cm-1
and cell const. = 0.1 cm-1)
0.0 ... 199,9
0 ... 1999
0.00 ... 19,99
0.0 ... 199,9
0 ... 500
spec. Resistance
[Milliohms * cm]
0.000 ... 1,999
0.00 ... 19,99
0.0 ... 199,9
0 ... 1999
SAL 0.0 ... 70.0 according to the IOT table
TDS [mg / l] 0 ... 1999
Factor set between
0.40 ... 1,00
T [° C] - 5.0 ... + 105,0
T [° F] + 23.0 ... + 221.0
Accuracy (± 1 digit):
68
No compensation:
Accuracy ± 0.5%
Nonlinear compensation
Accuracy Sample
± 0.5% 0 ° C ... 35 ° C
to EN 27 888;
± 0.5% 35 ° C ... 50 ° C
Advanced
nLF function after
WTW measurements
Linear Compensation:
Accuracy Sample
± 0.5% 10 ° C ... 75 ° C
(Refers to the percentage of accuracy
in each case to the measured value!)
SAL range 0.0 ... 42,0
Accuracy Sample
± 0.1 at 5 ° C ... 25 ° C
± 0.2 at 25 ° C ... 30 ° C
TDS [mg / l] 1
T [° C] NTC 30:
± 0.1
PT 1000:
Operating accuracy
± 0.5 0 ° C ... 15 ° C
± 0.1 15 ° C ... 35 ° C
± 1 35 ° C ... 55 ° C
T [° F] NTC 30:
Accuracy ± 0.2
PT 1000:
Operating accuracy
± 0.9 at 32 ° F ... 59 ° F
± 0.2 at 59 ° F ... 95 ° F
± 1.8 at 95 ° F ... 131 ° F
Setting the cell constant:
C [cm-1] 0.010
0.090 ... 0,110
0.250 ... 2,500
Calibrate the cell constant:
C [cm-1] 0.450 ... 0,500
0.800 ... 1,200
Selectable reference temperature:
TREF [° C] 20
25
Temperature input:
Manually [° C] - 5 ... +100
Dimensions and weight:
Length [mm] 250
Width [mm] 300
Height [mm] 70
Weight [kg] 1.3 (without AC adapter)
Analog output:
Automatic switch-over when the cable,
AK323.
Signal range
0 ... 1.999 V for the range
0 ... 1999 digits
Accuracy ± 0.5% of reading
± 0.1 (% saturation)
or
± 0.5% of reading ± 0.01 mg / l
Internal resistance
<5 Ohm
(Current limited to max. 0.2 mA output current)
Serial interface:
Automatic switch-over when the cable
AK340 / B, AK325 / S
Type RS232, data output
Baud rate set to 1200, 2400, 4800, 9600
Data bits 8
Stop bit 1
No parity (None)
RTS / CTS + Xon / Xoff
Cable length max. 15 m
Power Supply:
Batteries 4 x 1.5 V
Alkaline manganese batteries type AA
Running time approx 3000 hours
Network for the power supply unit is:
Connection max. Overvoltage category II
Power supply with Euro plug:
FRIWO FW3288, 11.8134
Friwo Part No. 1816492
Input: AC 230V / 50 Hz / 23 VA
Output: 6 V = / 1.8A / 10.8 VA
AC adapter with U.S. plug:
FRIWO FW3288, 11.8451
Friwo Part No. 1816493
Input: 120V ~ / 60 Hz / 21.5 VA
Output: 6 V = / 1,8 A
AC adapter with UK plug:
FRIWO FW3288, 11.8453
Friwo Part No. 1770896
Input: AC 230V / 50 Hz / 23 VA
Output: 6 V = / 1,8 A
Guidelines and standards:
EMC directive 89/336/EEC
EN 61326-1:1997
EN 61000-3-2 A14: 2000
EN 61000-3-3:1995
FCC Class A
Equipment Safety Council Directive 73/23/EEC
Class 3, EN 61010-1 A2: 1995
Climate Class 2, VDI/VDE3540
Certified:
TÜV GS, UL / CUL, CE
Condition: Used
